Description
- Brand Name: KACTUS TECH
- Type: Rear Derailleur
- Origin: CN(Origin)
- Components: Derailleurs
- Material: Carbon Fibre
- Model Number: KACTUS TECH 17 TSE
- Brand Name: KACTUS TECH
- Adaptation: Fit for 11 Speed SRAM ETAP
- Upper pulley: 12T
- Lower pulley: 17T
- Type 2: Derailleurs
- 12T / 17T pulleys: Aluminum alloy
- Cage Material: Carbon Fiber Cage
- Bearing type 1: Ceramic bearing
- Bearing type 2: Ceramic Bead Bearing
- Bearing type 3: NMB Steel Bearing
- Weight: About 60g
- Advantage 1: save 45% frictional resistance
- Ceramic Bearing Advantage: shifting speed increased by 20%-26%
- Ceramic Bearing Advantage 2: save save 2.2 watts on average each pedaling
- Structural advantage: Coaxial swing cage system
Derailleur Pulley
17TSE(12T +17T) Carbon Fiber Cage Ceramic Bearing
Bicycle Rear Derailleur Pulley Fit for SRAM ETAP
1.Carbon fiber frame/2.Ceramic bearing/3.Lighter weight/4.CNC process
Product analysis
1.Ceramic bearing//2.Full 7075 aluminum alloy material//3.KACTUS tech Logo//4.Carbon fiber cage//5.Full 7075 aluminum alloy material//6.Titanium alloy shaft
Product description
THE 1st ADVANTAGE:Compared with other brand 17T+17T pulley design, KACTUS TECH adopt the coaxial swing cage system to design the upper 12T/lower 17T system, lighter weight and more stable.
THE 2nd ADVANTAGE:The titanium alloy shaft is fixed to the aluminum alloy base. It can evenly distributing the force to the entire carbon fiber plate. will save 45% frictional resistance compared to original 11T pulley.
THE 3rd ADVANTAGE:If you buy the ceramic bearing version, it can save save 2.2 watts on average each pedaling, shifting speed increased by 20%-26%
THE 4th ADVANTAGE:The narrow-wide teeth design of the upper 12T pulley on the derailleur strengthens the left and right binding force of the chain, for more accurate and crisper shifting.
Carbon fiber bracket
Carbon fiber is a new type of fiber material with high strength and high modulus fiber with a carbon content of more than 95% Carbon fiber is "flexible on the outside and rigid on the inside". Its mass is lighter than that of metal aluminum, but its strength is higher than that of steel. It also has the characteristics of corrosion resistance and good stability.
CNC Machining Process
Full 7075 aluminum alloy CNC cutting lightweight guide wheel ,Heat treated CNC process Guaranteed strength Lightweight at the same time,The surface anodizing treatment enhances the hardness and wear resistance of the aluminum alloy surface, and prolongs the service life of the product.
Lighter weight
Carbon fiber cage, aluminum alloy guide wheel, Carbon fiber cage combined with aluminum alloy guide wheel makes the entire product only about 60 grams,perfect lightweight design.
Ceramic Bearing
If you buy the ceramic bearing version, it can save save 2.4 watts on average each pedaling, shifting speed increased by 20%-26%.
NOTICE:Bearings have 3 specifications (Ceramic bearing version Ceramic Bead Bearing Version NSK Steel Bearing Version), this description focuses on ceramic bearings, you can choose according to your needs
1.Full 7075 aluminum alloy material//2.G3 Silicon Nitride Ceramic Beads//3.Ceramic Zirconia
Multi-color options
A variety of colors are available, you can choose the color you like according to your needs, there is always one that suits you.
Product physical photos
The product is taken in kind and displayed from multiple angles, showing you more different product scenarios
Why Replace Derailleur Pulley Wheel
Firstly,porous spring position limit could adjust back tension largely, improve the weakness of original weak stretch, and make the up and down chain tension between guide wheel and cogs much more adequately.
Secondly,the contact tooth number or control tooth number between chain and cogs of rear derailleur 17T is more during gear shifting, it just like to pinch the middle and two sides of some sticks, the larger the control lever, the stronger the control power.
Lastly,after redesign the cage’s rotation curve, the distance between upper guide wheel and the cogs is improved.
Product installation process
1. First, find the triangle cover in the back of etap rear derailleur
2. Remove the cover with 1.5mm hex wrench
3. Remove the cover
4. Find the steel part with a hole when remove the cover
5. Remove the steel part (CAUTION: When you remove the steel part is easy to spring out the whole pulley cage)
6. Remove the steel part you can see it is a micro fixed fork
7.Grease the titaniumaxle before assemblynew cage
8. Grease the spring before assembly new cage.
9. Find the hole that red arrow show in the picture and push Spring in
10. Clockwise rotate the cage and pushin to rear derailleur
11. Push all when make sure the positioning post right in the position
12. Reset the steel fixed fork in the triangle hole
13.Push the steel fixed fork right in the position
14.Reset the triangle cover
15.Fixed cover screw in 2N.m with 1.5mm hex wrench
16.Check out the cover is immoveable
17.Finish
