ARCHON Max 240 min time diving photography light Max 5200 lumens white red uv LED diving underwater HD video photo diving lights

Description

(The battery and charger are included in the package)

Bulb: White CREE XM-L2 LED *8 (max 5200 Lumens);

           Red CREE XP-E LED*2 wavelength 620 nm (max 200 Lumens);

           UV LED*2 wavelength 365nm (max 6W);

Switch 1: White – Red – UV – off

            2: White high – White medium – White low – off

           The two switches can be operated separately or simultaneously.

Runtime: White High Mode: 1.5H;  

                White Medium Mode: 3.0H;  

                White Low Mode: 4.0H                                                         

                Red Light: 4.0H;  

                UV light: 5.0H

Color temperature: 5000K (white light)

Reflector: No hotspot design, no reflector;

Lens: 4mm Polycarbonate Board;

Body material: Durable aircraft-grade aluminum;

Angle of light beam: 110° for video light +10° for diving light

Surface treatment: Premium Type III hard-anodizing.

Color: Black

Battery: 18650 rechargeable Li- ion battery *4

Battery Indicator: 100%-50%: Green;

                               50%-30%: Yellow;

                               30%-10%:Red;

                               Below 10%: Red Flashing;

                               Below 5%: switch off;

With battery over-discharging protection, polarity reversing protection

with gas release valve

Operation voltage: 2.8V to 4.2V;

Waterproof: 100 meters underwater

Dimensions: 145mm (length)* 62.5mm (dia. of head),50.2mm (dia. of flashlight body)

Weight on land: 528 grams (without battery); 705 grams (with battery)

Underwater Weight: 341 grams (with battery)

Impact resistance: 1.5M.

 

BATTERY INSTALLATION

1.    Remove the tail by turning counter-clockwise.

2.    Remove used batteries and replace with fresh batteries as shown by the polarity stickers.

3.    Mount the tail by turning clockwise.

 

BATTERY CHARGING

1.    Plug the charger in the wall power socket, the indicator light is green in the free-load status.

2.    Put the battery in the slot of the charger.

3.    The indicator light is red if the battery is not fully charged; it will turn green after fully charged.

4.    Take out the fully charged battery and use them in the diving light.

 

SCUBA DIVING APPLICATION

Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE. 

 

CAUTION

If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.

If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.

 

Package include:

1 x Archon Diving Video Light 4 x Archon 18650 Li-ion battery 1 x Archon charger 1 x Handstrap 2 x  o-ring 1 x  manual