Description

Brand Name: Raiuleko
Origin: CN(Origin)
Number of Pieces: One Unit
Microneedle Length: 0.25mm
Material: Metal
Power Source: Rechargeable Battery
Model Number: rp-007
product name: Auto-stamp Motorized Meso
Model name: rp-007
Adapter:: 5V,1000mA
Weight: Main body 76g
High speed: Motor unit
Speed digital control: Level 3
Larger needle length adjustment: 0.25-3mm
Product Features 1: Shrink pores
Product Features 2: Brighten skin colour
Product Features 3: Water light introduction
Product Features 4: Pockmark
Product Features 5: Multiple essences
Product Features 6: Promote absorption
Microneedle Length: 0.25mm
Power Source: Rechargeable Battery
Input: AC100-240V 50/60Hz
Needles: 2pcs*12pin
Output: 5V 1A
Code: rp-007
needles microblading: MTS
MYM: derma Needle
Anti-wrinkle fade wrinkles: Auto microneedling
Acne pit print: microneedle
Whitening and moisturizing: micro Needle Tip
MTC skin management: mesotherapy
Refine pores: micro needle therapy
Improve skin tone: microneedling
Promote metabolism: microneedling needles
Help penetration: Nano Cartridge

How to operate

Adapter Mode

Plug in DC adaptor to the jack.

Plug in DC adaptor to AC outlet.

Battery Mode

Turn on Dr.pen directly with the fully charged battery.

To charge the battery :Plug the adapter into an outlet and connect it to charge. The battery indicator light will illuminate light will illuminate in red .Indicator light will turn green when fully charged.

Battery fully charges in about 4 hours.

Battery can be charged while working.

HOW TO OPERATE

Preparation

Take out needle cartridge in the sterilized packing.

Fitting round slots 1 into 2 of machine ,push needle cartridge horizontally up to the end.

Lock the cartridge by turning it to the counter clockwise.

Adjustment of needle length should be done after turn on the machine.

I f you want to remove the needle cartridge ,turn it to the clockwise and push out horizontally,fitting round slots(slot 1.slot 20slot) together.

Adjustment of needle length

You can adjust the length of needle by turning the adjustment ring clockwise or counter clockwise. Turning it clockwise ,length of it will be longer. Turning it counter clockwise,length of it will be shorter.

Adjustment of speed and needle length

Adjustment of Speed and ON/OFF

5Speed level control

Pressing the switch 2 seconds to open the device,it starts from the lowest speed to highest speed when you turn on the power firstly.The speed cycles low to high.Please press the switch 2 seconds when you need to stop the device.

The flicker frequence of light faster,the speed is higher.

REFERENCE CHART

Pegion	The skin	Thick skin
Forehead	0.25-0.5mm	0.5-0.75mm
Between eyebrow	0.25-0.5mm	0.5-1.0mm
Nose	0.25mm	0.5mm
Eye area	0.25mm	0.25-0.5mm
Cheek bone	0.5mm	0.5-1.0mm
Check and chin	0.5-1.0mm	1.0-2.0mm
Upper lip	0.25mm	0.25-0.75mm
Facial scarring	1.0-1.25mm	1.5-2mm
Stretch mark	1.5-2.0mm	1.5-2.0mm
Surgical &bum Scars	2.0-3.0mm

SPECIFICATION

Object

Apparatus for applying a Micro-needle Therapy by vibration

Preformance

A device for puncturing skin-penetrating drugs or cosmetics supports with a micro-needle guided between extended and retracted positions.

Classifications

-Type of protection against electric shock:class equipment.

-Degree of protection against electric shock:Floating Applied Part

-Degree of protection against the ingrees of water :Ordinary

Equipment(ixpo)

-Mode of operation :Continuous operation

Packing list

Host :1pcs

Cartrudges:2pcs 12pins

Manual :1pcs

Adapter:1pcs

[Operation]
Point method:
After the nanocrystal chip is mounted on the nanocrystal wafer and vertically touches the surface of the skin, it can be visually observed that there is a slight depression, and the speed, denseness, and gentleness are raised one by one. Adjust the strength according to the contact area

Sliding method:
After the nanocrystal chip is mounted on the nanochip, it is perpendicularly contacted with the skin surface, and a slight depression can be visually observed to slide in a straight line. While sliding, the nano wafer does not leave the skin surface, and the same part is recommended to stay for 3-5 seconds and the number does not exceed 2 Times.

Circle method:
After the nanocrystal chip is mounted on the nano-wafer and perpendicular to the surface of the skin, the sensation of the depression can be visually observed, and the nano-wafer does not leave the surface of the skin at the same time, and the same part is recommended to stay 3 – less and the number of times is less than 2 times.Various problem skin use steps and product recommendations

Dry, sensitive skin:
Before using various functional products, introduce the hydrating product (hyaluronic acid hydrating mask) three times before, and then introduce the functional product after the skin is not dehydrated. Introduce a small range before introducing a functional product, and use it on the entire face without symptoms such as redness, itching, etc. Please use the no-clean type hydrating products in time after import.

Spotted problem skin:
It is recommended to use acne essence with hydrating products (such as whitening column spot) to use acne-prone skin: It can be introduced with acne products. The acne skin itself has inflammation. It is recommended not to use it all over the face when importing. It should only be introduced at the acne area to avoid infection of other parts of the face.

Acne acne print introduction Note:
It can be introduced with acne products in combination with lyophilized powder. First use the lyophilized powder to introduce the acne marks. When importing, you should bypass the acne operation to avoid infection, and finally introduce the acne products vertically on the acne.

Specific operation methods of acne pit:

After cleansing, use the instrument to pick up the acne pit, then apply the lyophilized powder in the acne pit and lift it with the instrument until the acne pit is red or slightly painful. It is introduced twice a week, and the lyophilized powder is applied every morning and evening. Generally, it is more effective for more than three months. it is more effective for more than three months.